DA Pull Scraper 14
A 14 yd³ pull scraper. It cuts the ditch a pass at a time and fills its bowl; Left Alt + E empties it.
3.7 m wide · 220 hp
The Ditch Assist® mod
Survey it. Design it. Cut it on grade.
Designed for FS25 PC
Real surface drainage in your game. Two Ditch Assist implements, Slope-IQ™ design and Auto-Nudge™ passes, with the Ditch Assist screen in your cab.
Download · 0.3 MB
Free · Version 0.5.0.0 · File: FS25_DitchAssist.zip
On a phone? Download it on your computer, where the game is.
In the gameAuto grading
Two implements. One screen.
In the shop under Brands › Ditch Assist. Each one carries a GPS receiver and the Ditch Assist module.
DA Rotary Ditcher RD10
A big spinning disc cuts the channel, most of the depth in one pass, and throws the soil out to the side.
2.3 m wide · 200 hp
Up and running in four steps.
Install it.
Put FS25_DitchAssist.zip in your mods folder. Leave it zipped. Tick it in the mod list when you start or load a career. Where's the mods folder?
Buy and hitch.
Buy the scraper or the ditcher in the shop. In a tractor, Left Alt + H hitches it.
Survey and design.
Implement up, press Left Alt + D at one end and drive the ditch line. Press it again at the other end: Slope-IQ™ designs the best-fit grade to the outlet.
Cut it.
Left Alt + D to start grading. Lower the implement and drive the line. Left Alt + Up for the next pass.
The Ditch Assist screen.
Set your minimum grade and let Slope-IQ™ solve the design — it follows the natural slope where it works, cuts through any humps that hold back flow, and moves the least dirt possible to reach final grade.
Set the deepest cut your machine can pull in one pass. Auto-Nudge™ sets each pass target from the original ground, never deeper than that and never below final grade.
Drain the wet spots.
On farms made with ModMyFarm, the wettest ground in every field holds water, grows a shorter crop and yields less. Cut a ditch into it and the whole wet spot dries out, back to full yield.
Hitch a Ditch Assist implement and purple drainage routes show where the water runs, on the ground and on the map, arrows pointing downhill. The wet spots show on the map too, until you drain them.
Ponds, lakes and wetlands on the map stay as they are.
Need a farm? Download a farm Start my farm
The keys.
Hold Left Alt and press:
V on its own, the game's own key, lowers and raises the implement.
| Left Alt + | What it does |
|---|---|
| H | Hitch your Ditch Assist implement |
| D | Start the survey · Stop and design · Start grading · Back to the design |
| Up / Down | Design deeper / shallower While grading: next / previous pass |
| Right / Left | More / less minimum grade While grading: nudge up / down |
| O | Flip the outlet While grading: nudge back to 0 |
| Page Up / Page Down | More / less cut per pass |
| V | Profile view: slope, depth or elevation While grading |
| E | Empty the scraper's bowl |
| Backspace | Clear, start a new survey |
Good to know.
Any map
The implements and the Ditch Assist screen work on any map. The wet spots and drainage routes come with ModMyFarm farms.
Single player
It runs in single-player careers, not in multiplayer.
A new version?
Quit the game and swap the ZIP. Keep its name: FS25_DitchAssist.zip.
Not in the mod list?
The ZIP is in the wrong folder, got unzipped or renamed, or the game was open when you copied it. Where's the mods folder?
Ditch Assist® is a registered trademark of Northern Plains Drainage Systems Ltd. Slope-IQ™ and Auto-Nudge™ are its trademarks.